This is a reusable mesh style stencil with an adhesive back. Used with Torch Paste, it will create beautiful woodburned designs. Simply apply the stencil with your design to the wood, apply the Torch Paste with a medium stiff brush or squeegee, and remove the stencil. Wait two minutes for the paste to dry/absorb. Then apply heat with a heat gun and watch the design burn in to the wood!
The mesh style stencil allows for small, intricate designs. The stencil can generally be used up to 10 times with proper use and care. Use and care instructions are included with the stencil and MUST be followed in order to avoid damaging the stencil.
😊Please contact me for a price quote!😊 $10 is the minimum price plus shipping for a stencil. Stencils are NOT priced by the sheet. They are priced by the size, design and quantity. The largest design that can be created is 9″ wide x 11″ tall.
Contact me with the design you would like, the size of stencil needed, and how many stencils you will need. You may also attach an image if you have one.
NOTE: Buyer is responsible for ordering the correct size and orientation of stencil for the project as well as learning the stencil process. Refunds will not be given for the incorrect size, orientation, or damage to the stencil in the application process.
The listing is just for the reusable mesh stencil. You will also need Torch Paste, medium stiffness brush (small designs) or squeegee, and a heat gun that is at least 1000w. Of course you will also need your substrate to burn on the design!